Embedded Files
Our Wattles
Our Wattles
Teton Stormwater Supply manufactures straw wattles, which are sediment control logs designed for use in sediment control applications. The straw consists of 100% clean, NWFFS certified weed-free straw confined by a degradable mesh to form a log of specific length and diameter.
Straw wattles are designed to reduce hydraulic energy and filter sediment laden flow in channels and on slopes. The wattles are flexible to conform to the soil surface and are secured by staking. Each straw wattle is made in the USA and manufactured under Teton Stormwater's Quality Assurance Program to ensure a continuous distribution of fibers and consistent dimensions.
Installation
Wattles shall be installed by the contractor along the contour of slopes and perpendicular to flow in channels, trenches, or swales at intervals required by state conditions. Wattles shall be trenched 2-4" and staked such that wattles directly contact soil and preclude undermining or blowouts. Stakes shall be driven through the center of the wattle at a maximum spacing of approximately 4 feet on center and no greater than 6 inches from each end of the wattle. Ends of the adjacent wattles shall be tightly butted or overlapped so that no opening exists for water to pass through. No vehicles shall be driven over the wattles.Installation
Netting
Netting
More Wattles, More Efficiency
More Wattles, More Efficiency
We Offer Larger Loads Than Anyone Else To Keep Your Project Moving!
We Offer Larger Loads Than Anyone Else To Keep Your Project Moving!
32 pallets/load
32 pallets/load
16 wattles high
16 wattles high
512 individual 9" rolls
512 individual 9" rolls
Page updated
Google Sites
Report abuse